PoolPak Indoor Pool Dehumidifiers
Efficient and Effective Indoor Pool Dehumidification
Excess Moisture: A Problem for Indoor Pool Rooms
Poolrooms consisting of indoor swimming pools, called natatoriums, suffer from excess moisture buildup when pool water is warmed for swimming. This moisture is full of indoor air contaminants, such as chlorine or bromine disinfectants. These pollutants can cause serious mold and mildew problems, as well as occupant health issues. Therefore, poolroom dehumidification is critical to protect people’s wellbeing and the integrity of a building’s infrastructure.
PoolPak Indoor Pool Dehumidifiers as the Solution
However, natatorium dehumidification can be costly, and conventional systems are prone to inefficiencies and extra costs. How is it possible to design energy-efficient poolroom dehumidification systems? The answer is by using PoolPak indoor pool dehumidifiers, which are the best and most innovative on the market today. The systems dehumidify large athletic pools, natatoriums in schools and universities, commercial pools and hotel/motel leisure pools.
Indoor Pool Dehumidifiers for Any Application
PoolPak’s indoor pool dehumidifiers are suitable for any application where humidity is a concern. For instance, the Agronomic IQ line of humidity and temperature control equipment is designed specifically for grow rooms. The product line provides grow rooms with the most precise, stable and reliable temperature and humidity control possible. This is done while leveraging energy-recycling systems for both room heating and cooling as required.
PoolPak Build-On-Site Program
Indoor space is valuable, and large HVAC equipment, such as indoor pool dehumidifiers, are often installed in mechanical areas with limited or no access. When the equipment reaches the end of its useful life, system replacement can be an expensive and labor-intensive challenge. However, PoolPak’s build-on-site process makes dehumidifier replacement easy and less expensive.
The many benefits of PoolPak’s build-on-site program for indoor pool dehumidifiers include:
- Installation in tight spaces: PoolPak developed the Build-on-Site Program to overcome the obstacle of installation in tight or inaccessible spaces. This is done by sizing, building and testing systems on site. Build-on-Site is not just a factory unit partially disassembled and installed in sections. It’s the complete assembly of the PoolPak indoor pool dehumidifiers on site. Site-built units retain all warranties and are constructed from the frame up by highly qualified PoolPak technicians using factory component parts.
- Reduce costs: A PoolPak site-built installation can save thousands of dollars in avoided construction expenses. It eliminates building modifications, such as wall and roof removal, in order to access the mechanical room. In addition, reconstruction costs are nonexistent and site preparation is reduced. All PoolPak component parts fit through standard 30” doorways, and crane rental and rigging are no longer required.
- Fast installation: PoolPak indoor pool dehumidifiers will be completely installed and operational in as little as three days using the Build-on-Site Program. That means your indoor pool facility will be fully operational and ready for swimmers with minimal loss in revenue. There is also little disruption of facility activities during the construction period.
PRODUCTS
PoolPak PPK Series
The PoolPak PPK is the next generation for large pool room dehumidification. Featuring a fluid-cooled mechanical refrigeration system at its center, the PPK provides exceptional value delivering unparalleled, consistent environment control at competitive market pricing.
The smart design of this fluid-cooled system also provides improved energy savings, simpler installation requirements, significantly less refrigerant and other operational advantages over traditional air-cooled refrigeration systems. All refrigerant components are now factory sealed and fully factory tested for reliable performance. Combined with the full featured and friendly Virtual-Tech® web monitoring and expert-level factory-assisted startup, the PPK will make your pool project a breeze delivering consistent, sustained and economical performance.
Operational Features
- Active airflow monitoring and control
- Recycles energy from return air to supply air and pool water
- Modulating reheat for steady, precise control of both full and part-load conditions
- Dewpoint control and cold wall reset
- Meets ASHRAE 62.1 ventilation standards
- Virtual-Tech® factory monitoring via Ethernet (cellular/wireless options also available)
- Economizer for cooling and dehumidification
- Active refrigerant system performance monitoring and control
Construction Features
- Direct-drive fans with ECM or VFD
- Fluid-cooled refrigerant system
- Supply, exhaust and outside air flow measuring stations
- Fully dipped coils standard
- All critical components located outside the air stream
- Two-inch, double-wall, cabinet and doors with painted inner liner
- Easy accessibility for maintenance and service
- New fluid cooler option with unit-integral pump package
- Low-charge refrigerant system fully factory tested and sealed
- Exhaust air heat recovery option for pre-heat of outside air
- Paddock Evacuator compatible
- Smart pump (optional)
ComPak PCP Series – Horizontal & Vertical
The Compak PCP Series delivers proven, industry-leading design with state-of-the-art energy efficiency and performance enhancements. Consequently, it’s the smartest choice for small- to medium-size facilities. The PCP Series provides cost-effective, energy-efficient, temperature and humidity control for hotels, therapy pools, fitness facilities, private residences and similar size indoor pools.
With Virtual-Tech as a standard feature, the ComPak PCP Series is monitored 24/7 via the internet and backed by Dehumidified Air Services, PoolPak’s exclusive network of factory-direct service personnel. This control system redefines the concept of service and support by remotely monitoring, analyzing and reporting on all the critical functions of your dehumidifier 24/7 in real time at no additional cost. Automated performance monitoring with trouble alerts, service reminders and performance data sent by email. Factory or authorized service technicians can adjust and fine-tune unit performance or trouble-shoot issues. Connection activates premium extended first year labor warranty.
Operational Features
- Quiet, ultra-efficient dehumidification technology in a small footprint
- Wall condensation prevention
- Multiple options for air-side cooling/heating (air or water source) and pool-water heating (packaged/split systems)
- Recycles energy to pool air and pool water
- Easy-to-use touchscreen unit controls compatible with optional interface for common Building Automation Systems
- Meets ASHRAE 62.1 ventilation standards
Construction Features
- ComPak models PCP-0800 and 1200 available for horizontal, indoor-only configuration
- Vertical configurations available for ComPak models PCP-1400 to 4000
- Horizontal and roof-top configurations available for ComPak models PCP-1400 to 6000
- Multiple air-duct connection options provide flexibility for retrofit or new construction
- Easy to service and maintain
- Critical components are kept out of the air stream
- High-efficiency scroll compressors and direct drive ECM plenum fan(s)
- Smart pump (optional)
ComPak PCP StakPak Series
The ComPak StakPak Series is an ingenious innovation that provides twice the dehumidification in the same footprint as a regular unit. Its compact, two-stage design provides scalable capacity and performance of two complete systems in one, controlled by a single, sophisticated brain. The StakPak Series delivers the reliability of two independent, fully redundant circuits that provide optimal energy efficiency under all conditions.
With Virtual-Tech as a standard feature, the StakPak Series is monitored 24/7 via the internet and backed by Dehumidified Air Services, PoolPak’s exclusive national network of factory-direct service personnel.
The StakPak is reliable with state-of-the-art, corrosion-resistant, ultra-efficient, quiet fans that maximize air flow and minimize noise with no belts or pulleys to wear out or adjust. It protects all critical components from corrosion by isolating them from the pool airstream in a separate vestibule. PoolPak’s industry-leading moisture removal dehumidifies your facility efficiently while reducing operational energy costs.
Operational Features
- Quiet, ultra-efficient dehumidification technology in a small footprint
- Wall condensation prevention
- Multiple options for air-side cooling/heating (air and water source) and pool-water heating (packaged/split systems)
- Recycles energy to pool air and pool water
- Easy-to-use touchscreen unit controls compatible with optional interface for common Building Automation Systems
- Meets ASHRAE 62.1 ventilation standards
Construction Features
- Multiple air-duct connection options provide flexibility for retrofit or new construction
- Independent dual stages provide efficient staging plus redundancy
- Easy to service and maintain
- Critical components are kept out of the airstream
- High-efficiency scroll compressors and direct drive ECM plenum fan(s)
- Optional factory-supplied ECM-motor-driven exhaust
- StakPak models PCP-1414 to 2626 available for horizontal (indoor only) configuration
- StakPak models PCP-3030 to 5050 available for horizontal or roof-top configurations
- Build-On-Site construction available (optional)
- Smart pump (optional)
Let’s create a more sustainable world.
Our team partners with engineers, contractors, owners and operators across all commercial and high-rise residential building types. We customize our building efficiency technologies for every job to meet the specific needs of the most demanding structures.
